-SA -76
18-1
OTHER SETTINGS
Create network
Network setting is required in order to connect the embroidery machine with PC's network man-
agement software (HAPPY link LAN) .
You do not have to do this setting when you do not connect the machine with the network.
Note: HAPPY link LAN is a software designed to be used at LAN (Local Area Network) con-
nection between the software installed PC (server) and the software-enabled embroidery
machine(s).
If this network is connected with other network, you might not be able to communicate due to
the overlapping of IP address and other code.
If PC or machine that is connected with other network has to be inevitably connected with
Happy link LAN, you might change network settings as specified in this manual.
In this case, the settings are required by your network administrator or person(s) of network
knowledge.
22_1 P401
To Next Page
Loading...
