-D2 -99
8 Design information
*Various settings are saved together with a pattern. If some settings are changed in the
pattern and you wish to return to the originals, simply reload.
The data may only be HAPPY format (TAP).
9 Trace type
You can compare the design size and design position to the embroidery frame before you start
sewing.
The embroidery frame will move around the actual design size.
At this time you can choose which type of trace from the two types as seen in the following
figure:
10-4
READING
14_5 NB01
● Start point
Area Outline
To Next Page
Loading...
