-SJ -35
6-1
SEWING WITH TUBULAR FRAMES
6_1 O901
1. When the machine is stopped, press .
2. Press
.
Installing and removing the frame base
Please attach the frame base to the carriage when you wish to use a tubular embroidering hoop.
Please remove it in the reverse order of installation.
When you wish to use a tubular embroidering hoop (flat sewing), you can use either needle
plate for cap frame (Universal) or needle plate for flat sewing as picture below.
Please refer to "Changing the needle plate" when you exchange needle plate for flat sewing
to needle plate for cap frame. 7-1
Needle plate for cap frame (Universal)
Needle plate for flat sewing
To Next Page
Loading...
