-SJ -36
6-1b
SEWING WITH TUBULAR FRAMES
3. Select or .
: Tubular round frame
: Tubular square frame
: User-defined frame
4. Select desired type of frame.
5. Press button.
6. Move the carriage to the position shown by
press
.
7. Place the frame base on the carriage guide
and tighten the knob bolt on the tubular arm
holder completely.
Move the frame base right or left when it is hard
to tighten the knob bolts.
6_1b O901
Carriage
Fixing base
Knob bolt
Guide
Frame base
Press to return to Drive mode.
Pushing
against
To Next Page
Loading...
