Happy HCH - CAP FRAME (OPTION) Changing the Needle Plate

-SJ -42
7-1
CAP FRAME (OPTION)
7_2 O901
1. Remove the set screw (2 pieces) by offset
driver and remove the Standard needle
plate.
2. Put the needle plate for cap on the bed and
tighten with the set screw.
3. When the machine is stopped, press
.
4. Press
”OTHER”.
5. Press
.
6. Press to cancel "Jump".
Needle plate
for cap frame
(Universal)
Needle plate
for flat sewing
Changing the needle plate
When needle plate for flat sewing is installed on your machine, please exchange it to needle
plate for cap frame (Universal).
You need to use the needle plate when you embroider a cap.
You can use needle plate for cap frame (Universal) for either cap frame or tubular embroidering
hoop (flat sewing).