-SJ -21
BOBBIN WINDING
Winding the bobbin
4_4 N518
4-4
Thread the bobbin winder as shown below:
1. Upper Thread guide
2. Thread guide
3. Winder thread guide
4. Bobbin (Place the bobbin on the bobbin winder
spindle.)
5. Press the limit lever as indicated by the arrow
to start the winder. The lever stops the winder
automatically after the winding is complete.
1
2
3
4
5
• Ensure thread winds evenly on bobbin as
shown.
Confirm that the bobbin is wound properly.
CAUTION: To prevent accidents.
When lever is pressed down, the bobbin
winder spindle and the bobbin start turning.
Keep fingers and body away until the bobbin
winder stops turning.
To Next Page
Loading...
