-SJ -75
18-9
OTHER SETTINGS
22_6 O901
1. When the machine is stopped, press .
2. Press ”OTHER”.
3. Press
.
4. Press one key and check machine move-
ment.
CAUTION: To prevent accidents;
The machine moves quickly.
Keep hands away from the machine.
One equipment was not standby position, ma-
chine show following message
when you press key.
C point : Upper shaft is not at C point.
Cut blade : Thread cut blade is not at
standby position.
Thread Catcher : Thread Catcher is open
position.
Please press for back to standby potion
and repeat step 4 again.
**********
OK
Press to return to Menu mode.
To Next Page
