-D2 -175
24-6
ERRORS AND WHAT TO DO
24_8 M201
1. Press .
2. Select "Auto".
The thread catch hook returns to the original
position.
The display returns to drive mode.
What to do
for "Thread catch hook is off its position (error E-193)"
1. Press .
2. Select "Manual".
The Error status is cleared and the display
shows "drive mode".
3. Refer to the page in the section (ERRORS
AND WHAT TO DO), and determine what
may be preventing the hook from returning
to the original position, and follow the steps
outlined.
24-3
When you cannot clear by the method above (Auto)
E-193 Catcher
OK
E-193 Catcher
OK
To Next Page
Loading...
