Harris ACO6800+ISD - Page 76

62 ACO6800+ Installation and Operation Manual
Copyright © 2009, Harris Corporation
Chapter 6: ACO6800+IDSD Parameters, LEDs, and Alarms
Luma Peak Threshold
A1
A2
B1
B2
2, 3
3, 3
5, 3
6, 3
Sets the threshold at which excessive
luminance triggers the SDI Luma Peak
alarm
90% to 108%
(102%)
Chroma Low Threshold
A1
A2
B1
B2
2, 4
3, 4
5, 4
6, 4
Sets the threshold below which the SDI
Chroma Low alarm is triggered
0% to 15% (0%)
Chroma Peak Threshold
A1
A2
B1
B2
2, 5
3, 5
5, 5
6, 5
Sets the threshold at or above which an
excessive chrominance level triggers the
SDI Chroma Peak alarm
90% to 108%
(102%)
Video Black Threshold
A1
A2
B1
B2
2, 6
3, 6
5, 6
6, 6
Sets the threshold below which the SDI
Video Black alarm is triggered
0% to 10% (5.5%)
Peak Audio Threshold
(dBFS)
A1
A2
B1
B2
2, 7
3, 7
5, 7
6, 7
Sets the threshold above which SDI
Embedded Ch01 peak to SDI Embedded
Ch02 peak alarms are triggered
-20 dBFS to 0
dBFS
(-2 dBFS)
Low Audio Threshold
(dBFS)
A1
A2
B1
B2
2, 8
3, 8
5, 8
6, 8
Sets the threshold below which SDI
Embedded Ch01 Low Audio to SDI
Embedded Ch16 Low Audio alarms are
triggered
-80 dBFS to -30
dBFS
(-60 dBFS)
Loss of Sound Threshold
(dBFS)
A1
A2
B1
B2
2, 9
3, 9
5, 9
6, 9
Sets the threshold below which SDI
Embedded Ch01 Loss of Sound to SDI
Embedded Ch16 Loss of Sound alarms
are triggered
-100 dBFS to -60
dBFS
(-90 dBFS)
Audio Average Level
Reporting
A1
A2
B1
B2
2, A
3, A
4, A
5, A
Displays the SDI Embedded Channel
Average Level value
• Enable
• Disable
Table 6-2. ACO6800+IDSD Subdevice Parameters (Continued)
Group Parameter Name
Bank, Switch
Function Options