ACO6800+ Installation and Operation Manual 1
Copyright © 2009, Harris Corporation
Chapter 1
Introduction
Product Description
The ACO6800+ISD Single Switch Automatic Switchover
• Provides QSEE-driven 2×1 signal protection
• Switches signals between redundant signals at the point of ingest into a
satellite DTH, mobile TV, or IPTV facility
• Switches signals just prior to arriving at the broadcast transmitter
The ACO6800+DSD Dual Switch Automatic Switchover
• Provides loss of signal 2×1 protection
• Switches the signal between redundant signals at the point of ingest into a
satellite DTH, mobile TV, or IPTV facility
• Switches the signal on redundant paths within a facility
The ACO6800+IDSD Intelligent Dual Switch Automatic Switchover
• Provides QSEE-driven 2×1 signal protection
• Switches signals between redundant signals at the point of ingest into a
satellite DTH, mobile TV, or IPTV facility
• Switches signals just prior to arriving at the broadcast transmitter
The ACO6800+ASID Intelligent Single Switch Automatic Switchover
• Switches the signal between redundant signals at the point of ingest into a
satellite DTH, mobile TV, or IPTV facility
• Switches the signal on redundant paths within a facility
The ACO6800+ISCST Intelligent Single Clean Switch Automatic Switchover
• Provides Q-SEE-driven 2×1 signal protection with clean video switch and
quiet audio fade between sources
• Provides frame sync/audio sync capability
• Switches signals between redundant signals at the point of ingest and ingest
timing into a satellite DTH, mobile TV, or IPTV facility
ACO6800+ Features
All ACO6800+ modules have the following features:
To Next Page
Loading...