Need help?Do you have a question about the Harris IconMaster and is the answer not in the manual?
Provides general information about the manual, including purpose, audience, and revision history.
Explains the text conventions used throughout the manual for clarity and consistency.
Details procedures for unpacking and handling the product upon arrival for safe installation.
Outlines essential safety precautions to prevent injury and equipment damage during operation.
Specifies the terms and conditions governing the use of the embedded software.
Introduces the IconMaster system, its capabilities, and the manual's scope.
Describes the IconMaster control panel, its features, and modular design.
Lists the main and optional features of the IconMaster system.
Details the main hardware and software components of the IconMaster system.
Provides an overview of system setup complexity based on purchased components.
Explains the purpose of the chapter and the steps for installing IconMaster hardware.
Lists IconMaster main components and optional equipment required for installation.
Provides crucial environmental and mounting notes for successful installation.
Outlines common installation scenarios and directs users to relevant sections.
Lists all necessary tools and equipment for a successful IconMaster installation.
Provides step-by-step instructions for connecting the main and optional audio control panels.
Details how to mount control panels in a desk/tabletop or rack environment.
Explains how to install standard NEO modules like MKE-3901 and MGI-3903.
Describes the installation and functionality of available breakout modules.
Guides users on how to personalize pushbuttons on the IconMaster control panel.
Provides instructions for installing an optional fader bar assembly.
Introduces the chapter's focus on configuring MKE-3901, MKA-3901, and MGI-3903 modules.
Explains how to navigate and change parameters on the MKE-3901 module's VFD screen.
Details the configurable setup parameters for card-edge controls on the MKE-3901.
Describes the meaning and function of LEDs and module indicators on the MKE-3901 module.
Explains the LEDs and module indicators for the MGI-3903 module.
Guides users on designating audio output for each audio input using the ICU dialog box.
Explains how to configure IconMaster auxiliary bus routing for controlling router destinations.
Allows naming external keyers which are displayed on the RCP control panel.
Covers machine control and GPI-GPO configuration functions.
Introduces the chapter on router connections and lists the topics covered.
Illustrates a sample system layout including router, PC, and switch.
Details required connections for typical configurations involving NEO NSM internal routers.
Describes connections for typical configurations with Panacea external routers.
Details required connections for typical configurations involving Platinum external routers.
Covers essential settings like network, operating standard, and system timing after wiring.
Explains the Emergency Alert System (EAS) and its role in broadcasting.
Lists communication protocols supported by IconLogo for EAS devices.
Details the RS-232 connection between EAS devices and the IconMaster breakout module.
Provides information on basic configurations and preparations for the EAS device.
Introduces the chapter on machine control and lists its topics.
Provides steps for connecting the IconMaster system to a VTR for machine control.
Explains how the Edge protocol gateway provides external connectivity for routing systems.
Introduces the chapter on automation setup and lists its topics.
Details how to connect a DAL Harris Automation system using the McCurdy breakout box.
Lists the supported capabilities of the IconMaster master control switcher with D-Series automation.
Explains how to configure IconMaster to ignore automation commands for specific key layers.
Details how to set up a key mask to control automation commands on key layers.
Discusses important considerations and workarounds for automation operations.
Introduces the IconMaster Configuration Utility (ICU) software for system setup.
Provides step-by-step instructions for installing the IconMaster Configuration Utility.
Lists default configuration files provided for SD and HD systems.
Specifies the minimum hardware and software requirements for the configuration software.
Details the process of installing the IconMaster configuration utility software.
Explains how to uninstall the IconMaster Configuration software and associated tools.
Describes IconMaster's Ethernet-based communication and default network setup.
Provides the path to start the IconMaster Configuration Utility application.
Offers recommendations for PC monitor settings for optimal software display.
Lists the menu groups available for configuring IconMaster frame settings.
Identifies the menu group for control panel specific configuration.
Details the adjustments needed after starting the configuration utility.
Explains how to configure network settings for frames and control panels.
Describes how to select and change the operating standard for the IconMaster.
Explains how to adjust system timing for optimal input synchronization.
Provides instructions on creating, opening, and saving configuration databases.
Covers configuration functions for system input and output, including audio.
Allows users to name external keyers displayed on the RCP control panel.
Covers machine control and GPI-GPO configuration functions.
Details how to set appropriate control functions for automation.
Ensures correct setup of GPI/GPO and machine control settings for coordination.
Explains how to select automation types for inputs, including GPO, Serial, or Disabled.
Guides on enabling external GPIs and configuring them with the JLCooper eBOX.
Details how to add, delete, name, and configure GPO triggers and polarity.
Covers genlock, standard, router, system, automation, and network configurations.
Explains how to set the router type and configure router database characteristics.
Provides a quick reference for main control panel functions and ICU dialogs.
Explains how IconMaster uses router configuration tools to create and manage router databases.
Guides through the process of creating or adding a router to a RouterMapper database.
Details how to link a created router database to the IconMaster system using Navigator.
Explains how to define the IconMaster configuration within the Navigator application.
Covers steps to prepare the IconMaster configuration, including network and standard settings.
Guides on assigning router sources to IconMaster inputs using the ICU Primary Input window.
Provides a checklist to ensure basic system configuration and wiring for troubleshooting.
Troubleshooting steps related to breakout modules and cable connections.
Addresses issues related to IP addressing and network connections for system components.
Troubleshooting steps for firmware versions, genlock, and signal presence.
Troubleshooting steps for internal NEO NSM router control settings.
Troubleshooting steps for external router control including jumpers and baud rates.
Explains how to access and navigate the IconMaster service menu.
Provides steps to view and change the control panel's IP address via the service menu.
Provides contact information for customer service support.
Lists the specification tables available for the IconMaster system.
Details specifications for Serial Digital Video and Analog Video Reference inputs.
Lists specifications for Digital Video outputs and Keyer outputs.
Provides specifications for system video delay with and without FX modules.
Details specifications for Embedded and Discrete Audio for Audio Over.
Specifies input/output, resolution, and connector details for AES Audio Bus A and B.
Lists quantity, type, polarity, voltage range, and connectors for GPI inputs and outputs.
Details the power consumption for the control panel and frame components.
Provides Ethernet port specifications for the MGI-3903 module.
Lists miscellaneous specifications including timecode, Ethernet, and temperature.
To Next Page
General