IconMaster Installation and Configuration Manual 1
Chapter 1
Introduction
Overview
The IconMaster modular master control switcher provides, in a modular format,
the ability to combine critical master control functions with multi-integrated
branding. IconMaster is based on our industry-leading NEO modular platform.
It is the only control that can be combined with other advanced applications to
create a complete, self-contained channel release system.
This manual is part of a two-part set. Hardware installation and configuration
procedures are provided in one manual, and control panel operation and
configuration procedures are provided in the other manual. This manual
provides detailed information on installing and configuring the hardware
components in your IconMaster system. A complete setup will include
• Installing the IconMaster control panel
• Installing optional NEO modules
• Mounting a NEO frame in a rack
• Configuring NEO modules
• Connecting internal or external routers
• Connecting external Ethernet to serial and GPI interface devices
• Configuring control panel components (this information is provided in a
separate manual)
• Control panel operations (this information is provided in a separate manual)
• Optional software installation and operation (this information is provided in
a separate manual)
Each of these topics is covered in the IconMaster manual set. In some cases,
however, you will be referred to another manual for more detailed information.
To Next Page
Loading...