IconMaster Installation and Configuration Manual 249
Chapter 11: Specifications
GPI Inputs and Outputs
It is assumed that these inputs/outputs are externally isolated. They are low
voltage TTL style input/outputs.
Input
Output
Power Consumption
Table 11-13. GPI Input Specifications
Item Specification
Quantity 18 (8 for IconMaster LITE)
Type Non isolated TTL
Polarity Software specified
Voltage range -0.3 V to 5.3 V max
Current load 1 mA
Connector Part of 62-pin “D”-type
Table 11-14. GPI Output Specifications
Item Specification
Quantity 13 (7 for IconMaster LITE)
Type Open drain
Polarity Software specified
Voltage range -0.3 V to 5.3 V max
Load 40 mA max
Connector Part of 62-pin “D”-type
Table 11-15. Power Consumption
Item Power Consumption
Control panel 250 W maximum; 150 W typical
Frame
•NEO: <25 W
• Panacea: 70 W (1RU) or 105 W (2RU)
To Next Page
Loading...