IconMaster Installation and Configuration Manual xiii
Preface
Safety
Carefully review all safety precautions to avoid injury and prevent damage to
this product or any products connected to it. If this product is rack-mountable, it
should be mounted in an appropriate rack using the rack-mounting positions and
rear support guides provided. It is recommended that each frame be connected
to a separate electrical circuit for protection against circuit overloading. If this
product relies on forced air cooling, it is recommended that all obstructions to
the air flow be removed prior to mounting the frame in the rack.
If this product has a provision for external earth grounding, it is recommended
that the frame be grounded to earth via the protective earth ground on the rear
panel.
IMPORTANT! Only qualified personnel should perform service procedures.
Safety Terms and Symbols in this Manual
Terms and Symbols on the Product
DANGER: High voltage; indicates a personal injury hazard immediately
accessible as one reads the marking.
WARNING: Indicates a personal injury hazard not immediately
accessible as one reads the marking.
CAUTION: Indicates a hazard to property including the product or to
take Attention and refer to the manual.
Protective ground (earth) terminal.
Fuse. Replace with same type and rating of fuse.
Observe precautions for handling electrostatic sensitive devices.
WARNING
Statements identifying conditions or practices that may
result in personal injury or loss of life. High voltage is
present.
CAUTION
Statements identifying conditions or practices that can
result in damage to the equipment or other property.
To Next Page
Loading...