IconMaster Installation and Configuration Manual 203
Chapter 8: Configuring IconMaster
The IconMaster Serial Number field updates. If a license key is currently
installed on the MKE-3901 board, the License Key field also updates.
2. Provide the IconMaster serial number to your Customer Service
representative.
There are two ways to provide the serial number and receive your license
key:
• By phone: Contact your Sales representative.
• By faxing or mailing a form to Harris: This form is available by
clicking License Form. The form includes information on where it
should be sent. (Acrobat Reader is required.)
3. Enter the provided key in the License Key field.
Your license should be recognized immediately. You must restart the
IconMaster frame when the system is converted from IconMaster Lite to
IconMaster.
Serial Port Configuration Settings
The JL Cooper external interfaces include configuration options for
RS232 or RS422 operation, and are configured on the external
interface, not within ICU.
Figure 8-36. Serial Port Configuration Dialog Box
To Next Page
Loading...