IconMaster Installation and Configuration Manual 147
Chapter 8
Configuring IconMaster
Overview
Harris’s IconMaster Configuration Utility, or ICU, software is an easy-to-use
Windows®-based application for setting up and configuring the IconMaster
hardware system. It allows you to control configuration of input/output
functions; audio, effects, and transitions; system components; and panel
components via on-screen menu selections.
IMPORTANT! You may or may not have access to the ICU
software. If you do not, you must ask your system administrator to
perform these operations for you.
• “Installing ICU Software” on page 148
• “Starting ICU” on page 151
• “Initializing IconMaster” on page 152
• “Managing ICU Databases” on page 153
• “Input/Output Group Settings” on page 156
• “Functional Group Settings” on page 169
• “Control Group Settings” on page 183
• “System Config Group Settings” on page 191
• “Panels Group Settings” on page 208
• “Quick Configuration Quick Reference Chart” on page 213
Changes made in the IconMaster Configuration Utility will not take
effect on an IconMaster Switcher until the database has been
uploaded to the IconMaster frame. See
page 155 for instructions.
A quick reference chart is available on page 213. It shows the control panel
clusters, the functions that fall within each cluster, and the IconMaster
configuration utility dialog box that allows you to configure that particular
function.
To Next Page
Loading...