IconMaster Installation and Configuration Manual ix
Preface
Manual Information
Purpose
This manual details the features, installation procedures, configuration
procedures, and specifications of the IconMaster master control switcher.
Audience
This manual is written for engineers, technicians, and operators responsible for
the installation and setup of the IconMaster master control switcher.
Revision History
Table P-1. Revision History
Edition Software Contents Date
Preliminary 1
• Content Editor 1.0.0
• LogoCreator 3.1.1
• IconMaster GUI 1.0.0
• IconSet Configuration Utility 1.0.0
December 2005
Preliminary 2, for use with System
Software Release 1.0.1
• Content Editor 1.0.0
• LogoCreator 3.1.1
• IconLogo SoftPanel 1.0.0
• IconSet Configuration Utility 1.0.0
February 2006
Edition A, for use with System
Software Release 1.1
• Content Editor 1.0.0
• LogoCreator 3.1.1
• IconLogo SoftPanel 1.0.7
• IconMaster Configuration Utility 1.0.0.48
March 2006
Edition B, for use with System
Software Release 1.2
• Content Editor 1.0.0
• LogoCreator 3.1.1
• IconLogo SoftPanel 1.0.7
• IconMaster Configuration Utility 1.0.0.62
June 2006
Edition C, for use with System
Software Release 1.4
• Content Editor 1.0.0
• LogoCreator 3.1.1
• IconLogo SoftPanel 1.0.7
• IconMaster Configuration Utility 1.0.0.70
September 2006
To Next Page
Loading...