IconMaster Installation and Configuration Manual 69
Chapter 3: Module Configuration
Operator, All, and Tree View Parameter Lists
The MKE-3901 displays its parameters in an Operator List, All List, and Tree
View. These parameters are visible only at the card-edge of the module. CCS
software and control panels do not currently support IconMaster.
The Operator and All Lists include the following parameters:
• Unit_Name (read-only)
• IP_Address
• SW_Version (read-only)
•Setup
The Tree View includes the following parameter structure:
• Status
•Other
•Unit_Name
• IP_Address
•SW_Version
•Setup
Setup Parameters
You can modify the SETUP parameters to configure the card-edge controls for
your personal needs. The structure of the Setup menu is as follows (default
settings are indicated by asterisks):
Nav Mode (Navigation Mode)
(Options: Oper List*, All List, Tree View)
SelPar Adj Mode (Selectable Parameter Adjust Mode)
(Options: Immediate, Delayed*)
Brws Mode (Browse Mode)
(Options: Param List, Param+Val*)
Scrl Mode (Scroll Mode)
(Options: Wrap*, Don’t Wrap)
Disp Inten (Display Intensity)
(Options: 100%, 50%*, 25%, 12%)
Param Desc (Parameter Description)
(Options: Disabled, Enabled*)
About [RO]
See your NEO FR-3901, FR-3903, and FR-3923 Mounting Frames Installation
and Operation Manual for more information on Setup items.
To Next Page
Loading...