Harris ACO6800+ISD - Page 91

ACO6800+ Installation and Operation Manual 77
Copyright © 2009, Harris Corporation
Chapter 7: ACO6800+ASID Parameters, LEDs, and Alarms
Parameters > Parameter Settings > General Alarms > CRC_change > Table Settings
PAT CRC_change Activates the CRC Change PAT alarm
•On
• Off
PMT CRC_change Activates the CRC Change PMT alarm
•On
• Off
CAT CRC_change Activates the CRC Change CAT alarm
•On
• Off
DVB-NIT CRC_change Activates the CRC Change DVB-NIT alarm
•On
• Off
DVB-BAT CRC_change Activates the CRC Change DVB-BAT alarm
•On
• Off
DVB-SDT CRC_change Activates the CRC Change DVB-SDT alarm
•On
• Off
DVB-EIT CRC_change Activates the CRC Change DVB-EIT alarm
•On
• Off
ATSC-MGT CRC_change Activates the CRC Change ATSC-MGT alarm
•On
• Off
ATSC-TVCT CRC_change Activates the CRC Change ATSC-TVCT alarm
•On
• Off
ATSC-CVCT
CRC_change
Activates the CRC Change ATSC-CVCT alarm
•On
• Off
ATSC-RRT CRC_change Activates the CRC Change ATSC-RRT alarm
•On
• Off
ATSC-EIT CRC_change Activates the CRC Change ATSC-EIT alarm
•On
• Off
ATSC-ETT CRC_change Activates the CRC Change ATSC-ETT alarm
•On
• Off
Group Parameter Name Function Options