Harris Corporation Constellation™
CONFIGURING THE
HIGH LEVEL MUX
C HAPTER
7
CONFIGURING THE HIGH LEVEL
MUX
This chapter applies to narrow and medium capacity
radios only. Refer to page 1-3 for an explanation of
narrow/medium capacity radios.
Overview
In a repeater configuration, the HLM must be placed in either
• THRU TIMED or
• SOURCE timed.
THRU TIMED
In general, the HLM is placed in
THRU TIMED
. The exceptions are explained in
the “SOURCE timed” section.
From the Keypad menu, select
CONFIGURATION > SYSTEM > SYNCHRONIZATION MX > THRU TIMED
To Next Page
Loading...
