EasyManua.ls Logo

Harris Constellation - Table 8-10: Disable Traps; Table 8-9: Trap Management; Trap Management

Default Icon
264 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Constellation™ 2002 June 20
8-10
The address 255.255.255.255 indicates that this
instance of manager is not used; therefore, no trap will
be sent to this address.
Trap Management
Traps are sent to all the managers listed in the Trap Destination table. The trap
mechanism is user-configurable through the Keypad.
Table 8-9: Trap management
SNMP Submenu Selection Explanation
TRAP TIMEOUT
(SEC)
xxx The time between resending the same
trap message (= 0 if the Trap Repeat is 0)
Default: 10 seconds
TRAP REPEAT xxx The number of the same trap message
sent if the network manager does not poll
the system (acknowledge)
TRAP COMMUNITY Constellation Community name of a trap
Disable Traps Trap messages can be disabled or enabled.
All trap messages can be disabled as a
group, or each trap message can be
configured individually. See page B-11.
Table 8-10: Disable Traps
DISABLE TRAPS
Submenu
Selection Explanation
ALL TRAPS DISABLE ALL All trap messages can be disabled as a
group, or.
CFG
Individually
each trap message can be configured
individually.
36 traps messages
See page B-11.
Enable/Disable Each trap message can be disabled or
enabled individually.

Table of Contents

Other manuals for Harris Constellation

Related product manuals