Harris Constellation - Page 141

Harris Corporation Constellation™
Troubleshooting Guidelines 11-5
TROUBLESHOOTING
GUIDELINES
Receiver
Assembly
FAULT
ON-LINE
Red
Green
Board failure or input signal failure.
Carrying traffic.
Service Channel FAULT
ON-LINE
Red
Green
Indicates a board failure or inability to
synchronize with the far-end Service
Channel.
If power is on, this LED is always
lighted.
SPU Controller
MAJOR
MINOR
STATUS
ACTIVE
TX
RX
Red
Red
Yellow
Green
Green
Green
Indicates a loss of traffic (either receive or
transmit direction).
Indicates a non-traffic-affecting alarm or
control has been applied.
Indicates a loss of input signal from a
customer.
Normal condition.
Blinks whenever a packet of Ethernet signal is
being transmitted.
Blinks whenever a packet of Ethernet
signal is being received.
Transmitter
Assembly
FAULT
ON-LINE
Red
Green
Indicates board failure or an input signal
failure
Carrying traffic.
Table 11-1: LED indicators (Continued)
Module Label Color If the LED Is On