Hasselblad CFV II 50C - 5.1 Introduction and Basic Settings

5.1 INTRODUCTION
Thissectionwillcoverthebasicoperationwithallcompatible
cameramodels.Fordetailedinformationofeachcamera
model,youcanndusermanualsformostolderVSystem
camerasinthedownloadssectionoftheHasselbladwebsite
www.hasselblad.com.
5.2 BASIC SETTINGS
ISO
TheISOvalue(sensitivity)canbesetfromthecontrolscreen.
Ifthescreenisnotactivepressanyoftherearbuttonsto
activate.
Ifthecontrolscreenisnotalreadyvisibleyoucanslidethe
ngerfromthetoptothebottomtorevealit.Thiscanbe
donefromanyscreen.Seealsopage19.
Alternativelypressthemenubutton (B)untilyouseethe
controlscreen(A).
YoucansetISOeitherbyusingtouchorbyusingthebuttons.
Set ISO by touch:
TaptheISOvaluetobringoutthesettinglist(C). Select the
newISOvaluefromthelist.Slideup/downifthenewvalueis
notvisible.Tapthenewvalueandthelistwilldisappearand
the new value will be selected (D).
A
C
D
B
CFV II 50C USER GUIDE www.hasselblad.com
40
USINGTHECFV
CONTENTS