Hasselblad CFV II 50C - White Balance Settings

WHITE BALANCE
Thewhitebalance(WB)settingcontrolsthecolorrenderingof
theimagesshownonthedisplayandtheJPGles.ForRAW
les,WBcanalwaysbechangedinthecomputer.
WhiteBalancecanbesetfromthecontrolscreen.
Ifthescreenisnotactivepressanyoftherearbuttonsto
activate.
Ifthecontrolscreenisnotalreadyvisibleyoucanslidethe
ngerfromthetoptothebottomtorevealit(A). This can be
donefromanyscreen.
Alternativelypressthemenubutton(C)untilyouseethe
controlscreen(B).
YoucansetWBeitherbyusingtouchorbyusingthebuttons.
Set WB by touch:
TaptheWBicon(D)toshowthesettinglist(E). Select the new
WBsettingbytapping(F). The list will disappear and the new
value will be selected (G).
Settingofmanualwhitebalanceisexplainedonpage44.
Temp [ºK] Tint
AWB 2000-10000 -150to150
Cloudy 6500 10
Shade 7500 10
Daylight 5500 10
Tungsten 2850 0
Fluorescent 3800 21
Flash 5500 0
Manual Variable 0
A
B
C
D
E
F
G
CFV II 50C USER GUIDE www.hasselblad.com
42
USINGTHECFV
CONTENTS