Hasselblad CFV II 50C - Remote Control of 503 CW

REMOTE CONTROL OF A 503CW WITH WINDER CW
Whenthe503CXior503CWcameraisequippedwiththe
WinderCW,itcanberemotelyreleasedwhentetheredtoa
MacorPCrunningPhocus.Moreinformationonhowtether-
ingworkscanbefoundonpage103.
Connecttheexposurecable503(A) between the CFV and
thesocketatthebottomoftheWinderCW(C). The 2.5mm
connectorshallbeconnectedfromtheELXsocketontheCFV
(B).
● Setcamerabodytypeto503+WinderCWas
describedonpage69.
WhenthecameraisconnectedviaUSBtoacomputerrunning
Phocus,youcanreleasethecamerafromthecomputer.See
separatephocususerguideformoredetails.
B
A
C
CFV II 50C USER GUIDE www.hasselblad.com
51
USINGTHECFV
CONTENTS