91
• When selecting a neutralize point, select an object in the image
that should be a neutral (gray) color. is will not affect the image
brightness, only the color cast. For best results, select a point close to
the middle of the exposure range, for example with RGB pixel values
around 150.
5. Click on the target point. e highlight, shadow or gray value will be
reassigned to the values shown for that pixel in the info area. Your
screen will be instantly updated.
6. Inspect the preview using the Detail window and Color area. Look
for areas that are burned-out (showing values of 255) and also check
the shadow areas to be sure you have not hidden any details in these
areas. You can undo your settings by selecting Edit -> Undo or
pressing cmd-z on your keyboard.
To Next Page
Loading...
Need help?
General
