51
CMYK
is pop-up menu lists all of the output profiles currently installed on
your system. Choose the profile specific for your output device, or select
the closest of the generic profiles supplied with FlexColor. See “Generic
ICC Output Profiles” on page 59 for more information about the generic
profiles.
Edit
e Edit button appears only if you are using the Mac OS version of
FlexColor. Click on this button to edit the output profile. Use this
feature only if you are an advanced user, or on the advice of your printer.
For more information about editing ColorSync profiles, see “Editing
ColorSync Color Profiles” on page 60.
Gray
FlexColor offers full support even when saving images in grayscale. To
do so simply check the required Embed and Convert options, and if you
have checked Convert you also need to select a grayscale output profile.
Please note that you do not need to select a different input profile when
in grayscale mode, as a suitable grayscale input profile is automatically
generated based on the currently selected RGB input profile.
Convert
If this checkbox is marked data will be converted according to the
current settings of input and output profile. Otherwise the output files
will contain data without any ICC corrections applied.
Softproof
Mark this checkbox to see an on-screen representation of the colors
expected from your output device. It combines the output profile with
the monitor profile selected for your system to create a simulation of the
output colors. See the Getting Started... manual for instructions on how
to set up a monitor profile for you system and for advice about using the
Soproof feature.
To Next Page
Loading...
Need help?
General
