4 Wizard Description
30 User Guide
Stripe Number shows which stripe is being exposed at the moment.
Time [hh:mm]. shows the time that the exposure takes in total.
Remaining Time [hh:mm] shows the time that the exposure is still requiring to be
finished.
Hardware Info
The Hardware Info box shows important information about the system status. The
Refresh button updates the information stated in the tables. The Stage Position fields
show the x-coordinate and the y-coordinate of the current stage position. A click on
Refresh updates the fields to show the current position.
The Status list informs about the status of the system devices. If there is a red cross
instead of the word OK, click Refresh. If the status is still the same, go to the Info Tab
and click Status Messages. Here, you can see why the status does not show OK.
The Numeric Values list shows the condition of the system parts in numeric values.
These values are only interesting for service staff or users with administrator rights. If
any of the values is not in the normal range, the Status list shows the red cross icon
instead of the word OK.
To Next Page
Loading...