7 System Utilities and Tools
User Guide 67
7.3.2 UNSATISFYING EXPOSURE RESULTS
Sometimes exposure results can be unsatisfying for the needs of distinctive
applications. The MLA150 offers a way of optimizing the exposure outcomes. It is
possible to adjust the Defoc value or the Dose value. The following section gives details
about how to work with these two values in order to improve exposure results.
The Exposure Wizard offers a series exposure mode (6.8.3 Series Exposure
Procedure). This utility can be used to optimize exposure results by adjusting the
defocus value (Defoc) and/or the energy value (Dose). In order to find the best ratio
between these two parameters a series of exposures with different values can be
executed.
For more information see the relevant chapter on series exposures.