1 Introduction
User Guide 3
1.3 Related Documentation
Heidelberg Instruments offers several further manuals related to the machine and its
operation. If you did not get one of these or need an update, please contact Heidelberg
Instruments, Germany (1.2 Contact). See the list of related documents below:
Environmental and electrical
requirements, sizes and weights of
components etc.
PI- Site Inspection checklist
Checklist containing questions regarding
the conditions of the costumer’s
installation site for the system.
Describes necessary safety measures
during move-in, installation as well as
servicing and maintenance times.
Conversion Software Manual
Manual for the HIMT conversion software
used for data preparation and fractioning.
Instructions on design rules and design
creation.
Guide for Maintenance and
Troubleshooting, as well as an overview of
typical service tasks.
Overview of the systems technical data.
Short instructions to execute an exposure.