HIKVISION F Series

4.3 Display Road Informaon
Display a road sign with congurable texts to indicate the locaon on live image.
Steps
1. Go to
Conguraon → Image → Road Informaon .
2. Check Display Road
Informaon to enable the funcon.
3. Select a intersecon number and adjust the scene to the desired intersecon by controlling PTZ.
4.
Check and input desired informaon in the test elds.
5. Click Save.
6. Oponal: Repeat to set other intersecons. Up to 4 intersecons are supported.
Result
When the device turns to the saved intersecon, the road sign displays on the live image.
F Series Network Speed Dome User Manual
14