HIKVISION F Series

TLS (Transport Layer Security)
The device oers TLS1.1 and TLS1.2. Enable one or more protocol versions according to your
need.
3. Click Save.
11.11 Set HTTP Listening
The device can send alarms to desnaon IP or host name through HTTP or HTTPS protocol. The
desnaon IP or host name should support the HTTP data transmission.
Steps
1. Go to Conguraon → Network → Advanced Sengs → HTTP Listening .
2. Input Desnaon IP or Host Name, URL, and Port.
3. Select Protocol.
Note
HTTP and HTTPS are selectable. It is recommended to use HTTPS, as it encrypts the data
transmission during communicaon.
4. Click Test.
5. Click Save.
11.12 TCP
Acceleraon
TCP acceleraon is used to improve latency and reduce packet loss caused by network congeson
in poor network condion, and guarantee the uency of live view.
11.13
Trac Shaping
Trac shaping is used to shape and smooth video data packet before transmission.
It helps to improve latency and reduce packet loss caused by network
congeson and ensure the
video quality as well. Shaping level is congurable.
F Series Network Speed Dome User Manual
77