HIKVISION F Series - Set Alarm Input; Smart Event; Detect Audio Exception

9.1.4 Set Alarm Input
Alarm signal from the external device triggers the corresponding acons of the current device.
Before You Start
Make sure the external alarm device is connected. See Quick Start Guide for cables connecon.
Steps
1. Go to
Conguraon → Event → Basic Event → Alarm Input .
2. Check Enable Alarm Input Handing.
3. Select Alarm Input NO. and Alarm Type from the dropdown list. Edit the Alarm Name.
4. Refer to Set Arming Schedule for
seng scheduled me. Refer to Linkage Method Sengs for
seng linkage method.
5. Click Copy to... to copy the sengs to other alarm input channels.
6. Click Save.
9.2 Smart Event
Note
• For certain device models, you need to enable the smart event
funcon on VCA Resource page
rst to show the funcon conguraon page.
• The funcon varies according to dierent models.
9.2.1 Detect Audio Excepon
Audio excepon detecon funcon detects the abnormal sound in the surveillance scene, such as
the sudden increase/decrease of the sound intensity, and some certain acons can be taken as
response.
Steps
1. Go to
Conguraon → Event → Smart Event → Audio Excepon Detecon .
2. Select one or several audio excepon detecon types.
Audio Loss
Detecon
Detect sudden loss of audio track.
Sudden Increase of Sound Intensity Detecon
Detect sudden increase of sound intensity. Sensivity and Sound Intensity Threshold are
congurable.
F Series Network Speed Dome User Manual
55