HIKVISION F Series

Figure 9-3 Set Video Tampering Area
5. Refer to Set Arming Schedule for seng scheduled me. Refer to Linkage Method Sengs for
seng linkage method.
6. Click Save.
9.1.3 Set
Excepon Alarm
Excepon such as network disconnecon can trigger the device to take corresponding acon.
Steps
1. Go to Conguraon → Event → Basic Event → Excepon .
2. Select
Excepon Type.
HDD Full
The HDD storage is full.
HDD Error Error occurs in HDD.
Network Disconnected The device is oine.
IP Address Conicted The IP address of current device is same as that of other device in
the network.
Illegal Login Incorrect user name or password is entered.
3. Refer to Linkage Method Sengs for seng linkage method.
4. Click Save.
F Series Network Speed Dome User Manual
54