HIKVISION F Series User Manual

Call The device moves to the set inial posion.
Clear Clear the set inial posion.
5.7 Set Scheduled Tasks
You can set the device to perform a certain task during a certain period.
Steps
1. Go to Conguraon → PTZ → Scheduled Tasks .
2. Check Enable Scheduled Task.
3. Select the task type and set the period. For
seng the period, refer to Set Arming Schedule .
4. Repeat step 3 to set more than one scheduled tasks.
5. Set Park Time. During the set task period, if you operate the device manually, the scheduled
task will be suspended. When the manual
operaon is over, the device will connue to perform
the scheduled task aer the set park me.
6. Click Save.
Note
If you want to clear all scheduled tasks, go to Conguraon → PTZ → Clear Cong , check Clear
All Scheduled Tasks, and click Save.
5.8 Set Park Acon
You can set the device to perform an acon (for example, preset or patrol) or return to a posion
aer a period of inacvity (park me).
Before You Start
Set the acon type rst. For example, if you want to select patrol as park acon, you should set the
patrol. For
seng patrols, refer to Set Patrol Scan .
Steps
1. Go to Conguraon → PTZ → Park Acon and check Enable Park Acon.
2. Set Park Time, the inacve me before the device starts the park acon.
3. Select Acon Type according to your needs.
4. Click Save.
5.8.1 Set One-Touch Park
This funcon is used to start park instantly.
Steps
1. Refer to Set Park Acon to set a park acon.
F Series Network Speed Dome User Manual
21

HIKVISION F Series Specifications

General

Brand	HIKVISION
Model	F Series
Category	Security Camera
Language	English