Hillrom Progressa P7500 User Manual

Surfaces
62 Progressa® Bed Instructions for Use (171528 REV 9)
Seat Deflate
The Seat Deflate feature allows for
easier bedpan placement.
WARNING:
Warning—Seat deflate is not
recommended for side sitting or
side egress. Injury could occur.
To Activate
1. Press the Surface control on
the GCI.
2. Press the Seat Deflate control.
The Progressa® Therapy Surface will
automatically exit the Seat Deflate
mode and return to normal mode
after 30 minutes. After 28 minutes,
a beep will sound and a screen on
the GCI will appear that there are 2
minutes left.
To Deactivate
1. Press the Surface control on
the GCI.
2. Press the Normal control.
Patient Comfort
Allows customizing based on
patient request while maintaining
pressure redistribution.
The system automatically supplies
pressure distribution for the
patient’s position on the mattress.
To Adjust the Firmness
1. Press the Surface control on
the GCI.
2. Press Patient Comfort on the
GCI.
3. Use the Patient Comfort
controls to change the
pressure in the head, seat, and
lower leg sections of the
mattress assembly:
•To Increase the pressure, press
the Up arrow.
•To Decrease the pressure,
press the Down arrow.

Hillrom Progressa P7500 Specifications

General

Brand	Hillrom
Model	Progressa P7500
Category	Medical Equipment
Language	English