HIMax System Appendix
HI 801 001 E Rev. 4.01 Page 119 of 122
Index of Tables
Table 1: Standards for EMC, Climatic and Environmental Requirements 11
Table 2: General requirements 11
Table 3: Climatic Requirements 11
Table 4: Mechanical Tests 11
Table 5: Interference Immunity Tests 12
Table 6: Noise Emission Tests 12
Table 7: Review of the DC Supply Characteristics 13
Table 8: Default Values for Maximum System Bus Latency 25
Table 9: Identifying a Module using the System.Rack.Slot 33
Table 10: Slot Positions Recommended for Processor Modules 34
Table 11: Operating System States, Adopting the States 36
Table 12: Operating System States, Possible User Interventions 37
Table 13: Examples of Calculating the min. and max. Noise Blanking Time 38
Table 14: Types of Variables 50
Table 15: System Variables at Different Project Levels 51
Table 16: Resource System Parameters 54
Table 17: The Hardware System Variables for Setting the Parameters 55
Table 18: Hardware System Variables for Reading the Parameters 59
Table 19: Assigning the Index to Processor Module Slots 59
Table 20: System Parameters of the User Program 60
Table 21: Parameters for Boolean Events 64
Table 22: Parameters for Scalar Events 66
Table 23: Parameters Configurable for Multitasking 70
Table 24: Reloading after Changes 77
Table 25: Module Order while Loading the Operating System 78
Table 26: Authorization Types for the PADT User Management Scheme 80
Table 27: Parameters for User Accounts in the PES User Management Scheme 82
Table 28: Blinking Frequencies 83
Table 29: Assignment of the LED Groups to the Types of Modules 83
Table 30: Module Status Indicators 84
Table 31: Redundancy Indicators 84
Table 32: System Bus Indicators 85
Table 33: Rack Connection Indicators 85
Table 34: Slot Indicators 85
Table 35: Maintenance Indicators 86
Table 36: Fault Indicators 86
Table 37: I/O Indicators LEDs 87
Table 38: Fieldbus Indicators 87
Table 39: Ethernet Indicators 88
To Next Page
Loading...
Need help?
General
