96
6.1 Measuring the Voltage, Current, and Power (Instantaneous Values)
• When 3P3W2M is selected as the wiring method, U3 and I3
are obtained by vector calculation. See the Appendix (page
195).
• When 3P3W3M is selected, P1, P2, and P3 are data for refer-
ence purposes only.
• When 3P4W or 3P4W4I is selected, the voltage is obtained as
the phase to neutral voltage.
• When multiple circuits are measured, use the
F2
(CIRCUIT)
key to display the data of other circuits.
To Next Page
Loading...
