Hioki 3169-20 - Setting the Reactive-Power-Meter Method

60
5.2 Setting on the Measurement Setting Screen (MEASUREMENT)
5.2.3 Setting the Reactive-Power-Meter Method
When the reactive-power-meter method is OFF (not to be used),
the signs for lag and lead will not be added to reactive-power
measurements.
Press the
SET UP
key to display the setting screen.
Press the
F5
(NEXT SCR) key to display the measurement setting
screen. (3169-20: SET UP 1/4, 3169-21: SET UP 1/5)
Move the cursor to "
VAR METHOD
."
Use the function keys to set whether to use the reactive-power-
meter method.
OFF
Do not use the reactive-power meter method (default).
ON
Use the reactive-power-meter method.
OFF
ON
NEXT
SCR