114
6.9 Holding Displayed Measurement Data
6.9 Holding Displayed Measurement Data
• The
START/STOP
key is disabled during Hold.
• If the
SAVE
key is pressed for manual data storage during Hold,
the held instantaneous value is saved.
• The automatic-output function during time-series measure-
ment outputs data of every interval, regardless of whether the
Hold function is ON.
When the
F5
(HOLD) key is pressed on a measurement screen,
the on-screen measurement data will be held. Pressing the
F5
key
again releases the Hold.
Lights up when the
HOLD
displayed
measurement is held
To Next Page
Loading...
