Hioki 3169-20 - Setting Harmonic Measurement-Data Output Items

82
5.4 Setting on the Save/Print Items Setting Screen (SAVE, PRINT ITEMS)
5.4.4 Setting Harmonic Measurement-data Output
Items
(1 ) Set the Harmonic Measurement-data Output.
Press the
SET UP
key to display the setting screen.
Press the
F5
(NEXT SCR) key to display the save/print items set-
ting screen. (3169-20: SET UP 3/4, 3169-21: SET UP 3/5)
Move the cursor to "
HARMONIC
."
Press the
F2
(ON) key to turn ON harmonic measurement.
Move the cursor to "
INST.
"(instantaneous values.)
Turn data output ON/OFF using the function keys.
Turn the output of other items (average, maximum, and minimum
values) ON/OFF in a similar way.
ON
OFF
ON
NEXT
SCR