Product Overview
13
1
2
3
4
5
6
7
8
9
10
11
12
13
The 3169-20/21 CLAMP ON POWER HiTESTER is a clamp-on
wattmeter designed to measure lines ranging from a single-phase line to
a three-phase 4-wire line.
The 3169-20/21 can measure demand and harmonics, which are
important for power management, as well as such basic measurements
of voltage, current, power, power factor, and integrated power (watt-
hours).
The 3169-20/21 supports extended data acquisition and automated
measurement, thanks to the use of the PC card and RS-232C interface.
This makes the 3169-20/21 suitable for power measurement at
commercial frequencies involved in the power maintenance and
management of a building or factory.
Overview
1
1.1 Product Overview
To Next Page
Loading...
