Hioki 3169-20 - Setting Normal Measurement-Data Output Items

80
5.4 Setting on the Save/Print Items Setting Screen (SAVE, PRINT ITEMS)
5.4.2 Setting Normal Measurement-Data Output Items
• Normal measurement data includes, for each channel, the volt-
age, current, active power, reactive power, apparent power,
power factor, frequency, and each phase power.
• Detailed setting is not available for each piece of normal mea-
surement data above.
Press the
SET UP
key to display the setting screen.
Press the
F5
(NEXT SCR) key to display the save/print items set-
ting screen. (3169-20: SET UP 3/4, 3169-21: SET UP 3/5)
Move the cursor to "
NORM. MEAS
."
Press the
F2
(ON) key to turn ON normal measurement.
Move the cursor to "
INST.
"(instantaneous values.)
Turn data output ON/OFF using the function keys.
Turn the output of other items (average, maximum, and minimum
values) ON/OFF in a similar way.
ON
OFF
ON
NEXT
SCR