Hioki 3169-20 - Setting Medium for Saving Data

5.3 Setting on the Data Output Setting Screen (DATA OUTPUT)
75
1
2
3
4
5
6
7
8
9
10
11
5.3.4 Setting Medium for Saving Data
Observe the following precautions when setting the interval to 2
seconds or less:
• Use the optional PC card.
• Be sure to format the PC card.
• Insert the PC card before starting time-series measurement.
• Do not remove the PC card during measurement.
• Do not perform communications.
• Do not operate the keys too frequently.
When the PC card is selected, if a PC card is not installed or the
3169-20/21 fails to write data onto the PC card, the data will be
stored in the internal memory as backup data.
Press the
SET UP
key to display the setting screen.
Press the
F5
(NEXT SCR) key to display the data output setting
screen. (3169-20: SET UP 2/4, 3169-21: SET UP 2/5)
Move the cursor to "
SAVE IN...
."
Set the medium for saving data using the function keys.
NEXT
SCR
CARD
MEMORY