Hioki 3169-20 - 5.3.2 Setting Time-Series Measurement Stop Method

5.3 Setting on the Data Output Setting Screen (DATA OUTPUT)
71
1
2
3
4
5
6
7
8
9
10
11
5.3.2 Setting Time-Series Measurement Stop Method
When the stop method is set to Time or Timer, if the
START/STOP
key is pressed during measurement, a message is displayed
requesting confirmation. Pressing the
F1
(yes) key stops mea-
surement immediately.
Press the
SET UP
key to display the setting screen.
Press the
F5
(NEXT SCR) key to display the data output setting
screen. (3169-20: SET UP 2/4, 3169-21: SET UP 2/5)
Move the cursor to "
MEAS. STOP
."
Set the time-series measurement stop method using the function
keys.
MANUAL Manua lMeasurement stops when the START/STOP key is
pressed (default setting).
TIME Measurement stops at the exact time set by users.
TIMER Measurement stops when the duration set by the users has
elapsed.
1 second to 8784 hours
NEXT
SCR
MANUAL
TIME
TIMER