6.5 Measuring Integrated power
103
1
2
3
4
5
6
7
8
9
10
11
Measures integrated power (Wh)
6.5 Measuring Integrated power
• The display shows the total integrated power from the start of
time-series measurement.
• When the reactive-power-meter method is OFF, the display
does not show the lead (WQ-) values of the integrated reactive
power.
• When multiple circuits are measured, use the
F2
(CIRCUIT)
key to display data of other circuits.
Set the measurement start/stop methods, interval, medium for
saving data, and data output items on the measurement setting,
data-output setting, and save/print items setting screens.
❖
5 Setting Procedure (page 55)
Press the
MEASURE
key to display the measurement screen.
Press the
F1
(SCREEN) key to display the selection window.
Select "
INTEGRATE
" using the cursor key.
Press the
F1
(select) key to show the integrated power display
screen.
Press the
START/STOP
key to start integrated power measurement.
Changes the circuit to display
(when multiple circuits are measured).
NEXT
SCR
SCREEN
select
To Next Page
Loading...
