Hioki 3169-20 - Introduction 1

1
1
2
3
4
5
6
7
8
9
10
11
Introduction
Thank you for purchasing the HIOKI “3169-20/21 CLAMP ON
POWER HiTESTER”. To obtain maximum performance from the
product, please read this manual first, and keep it handy for future
reference.
• Refer to the Quick Start Manual provided with this device.
• For current input with this device, a clamp-on sensor (optional) is
required. For details, refer to the instruction manual for the
clamp-on sensor you are using.
Standard Accessories and Options
Checking the contents of the package
When you receive the product, inspect it carefully to ensure that no
damage occurred during shipping. In particular, check the accesso-
ries, panel switches, and connectors. If damage is evident, or if it
fails to operate according to the specifications, contact your dealer
or Hioki representative.
Power Cord
Input Cord Label
9438-03 VOLTAGE CORD
1 set (4 cords)
(One each red, yellow, blue, and
black cords.)
3169-20/21
CLAMP ON POWER
HiTESTER
Quick Start Manual
• Instruction Manual
• RS-232C Instruction
Manual
• CSV Conversion
Software (CD-R)
Instruction
Manual
9441 CONNECTION CABLE
(for D/A output, 3169-21 only)