Hioki 3169-20 - Copied

78
5.3 Setting on the Data Output Setting Screen (DATA OUTPUT)
5.3.7 Setting the Medium to which the Screen is to be
Copied
The
F3
(Printer) key will not be displayed on the screen unless
the printer is selected as the device to be connected to the RS-
232C.
Press the
SET UP
key to display the setting screen.
Press the
F5
(NEXT SCR) key to display the data output setting
screen. (3169-20: SET UP 2/4, 3169-21: SET UP 2/5)
Move the cursor to "
DISPLAY COPY
."
Use the function keys to set the medium to which the screen is to
be copied.
PRINTER
CARD
MEMORY
NEXT
SCR