5.3 Setting on the Data Output Setting Screen (DATA OUTPUT)
77
1
2
3
4
5
6
7
8
9
10
11
5.3.6 Setting Device to Be Connected to the RS-232C
Press the
SET UP
key to display the setting screen.
Press the
F5
(NEXT SCR) key to display the data output setting
screen. (3169-20: SET UP 2/4, 3169-21: SET UP 2/5)
Move the cursor to "
RS CONNECTION."
Use the function keys to set the device to be connected to the RS-
232C interface (Default: PC).
PC
PRINER
NEXT
SCR
To Next Page
Loading...
