Hioki 3169-20 - Setting on the Save;Print Items Setting Screen

5.4 Setting on the Save/Print Items Setting Screen (SAVE, PRINT ITEMS)
79
1
2
3
4
5
6
7
8
9
10
11
The save/print items setting screen allows the following items to be
set or displayed:
• Display the number of output data items and storable time.
• Set the normal measurement-data output items.
• Set the integrated power and demand measurement-data output.
• Set the harmonic measurement-data output items.
5.4.1 Checking the number of output data items and
Storable Time
5.4 Setting on the Save/Print Items Setting
Screen (SAVE, PRINT ITEMS)
Save/print items setting screen
Displays the storable time
Displays the data storable time of the set medium
for saving data (PC card/internal memory)
(xxx days: xx hours: xx minutes: xx seconds)
Displays the num-
ber of output data
items.
Make sure the
number of output
data items does
not exceed 256
when reading
stored data into a
generally avail-
able spreadsheet.
Press the
SET UP
key to display the setting screen.
Press the
F5
(NEXT SCR) key to display the save/print items set-
ting screen. (3169-20: SET UP 3/4, 3169-21: SET UP 3/5)
NEXT
SCR